Geek Vape AEGIS 100W Box Mod

More Views

Geek Vape AEGIS 100W Box Mod


Be the first to review this product

Availability: In stock

Only 103 left

Product Name Qty
GeekVape AEGIS Box Mod-Black 39
Geek Vape AEGIS Box Mod-Yellow 2
Geek Vape AEGIS Box Mod-Brushed Slate 43
Geek Vape AEGIS Box Mod-Brown 19

Regular Price: $99.99

Special Price $69.99


* Required Fields

Regular Price: $99.99

Special Price $69.99


Giveaway Rule:

GeekVape AEGIS Box Mod




Geek Vape AEGIS 100W Box Mod,Designed by Justin, Geekvape GM, along with the chief designer of Heatvape Invader mini, the Aegis is a legendary TC box mod that runs up to 100W with
single 18650 or 26650 battery. It is designed to be waterproof, shockproof and dustproof by adopting advanced LSR Injection Moulding technology.

It uses one of the most advanced chip featuring the real rated power and instantaneous firing (0.015 seconds)

It is the most robust vape mod(MIL STD 810G-516.6 military grade shockproof)
no need to worry about getting scratched,soiled or broken by accident anymore

IP67 waterproof, friendly for beach, fishing, swimming,boating, kayaking, and water park activities

Dustproof (IP67), able to withstand dirty environment and can be easily cleaned

It supports both 18650 and 26650

How to use


1.Tuen On:press the FIRE button 5 times in quick succession to turn on the device.

2.Turn Off:press the FIRE button 5 times in quick succession to turn on the device.

3.Setting state:Press the FIRE button 3 times in quick succession to enter on the device.

4.Switch between working modes:(POWER/TC-NI/TC-SS/TC-TI/TC-TCR/VRC/BYPASS)In the setting state use the(+)&(-) button to toggle between modes,press and hold the FIRE button for 0.8s or allow 5s of inactivity to select.

5.TCR Set up:On the mode selection screen toggle to TC-TCR, press and hold the fire button to enter the mode,use the(+)&(-) button to adjust the TCR value.

6.VPC Set up:On the mode selection screen toggle to VPC,press and hold the fire button to enter the VPC mode,Press the FIRE button and use the(+)&(-) button to set the values to P1/P2/P3/P4/P5.

7.Resistance and Puffs Reset:Enter the setting state.Press and hold the fire button to toggle the cursor to the COIL or PUFF.Press (+) to reset the COIL or PUFF value.

8.Resistance lock:Enter the setting state.Press and hold the fire button to toggle the cursor to the COIL.Press (-) button to lock and unlock the resistance.

9.Scrern lock:Press and hold(+)&(-) button simultaneously to Lock and Unlock the screen.

10.Display brightness adjustment:Press and hold the FIRE &(+) or (-) button simultaneously to adjust the brightness of the display.

11.USB update:(Plese see Diagram 11)

(1)Remove Atomizer.

(2)Remove the screws.

(3)Remove the cover plate.

(4)Remove the USB waterproof silicon cover to access the USB port.

(5)Hold down the FIRE button and insert the USB cable to a PC to per form the update operation.

Description Warning

1.NO COIL DETECTED:No atomizer detected.Please check if the atomizer and coil is properly connected

2.PROTECTION ATOMIZER SHORT:The atomizer is short circuited.Please check your coils for any shortage.

3.ATOMIZER RESISTANCE HIGH:Resistance of the atomizer is too higt,Please check your coils

4.10s CUT-OFF PROTECTION:Output will automatically shut off after 10s

5.BATTERY LOW PROTECTION:Battey voltage is low,please recharge your battery.

6.BATTERY WEAK PLZ LOWER WATTAGE:The battey is too weak,please check whether it is well connected/replace with a higher rated battery/lower the power setting or charge your battery.

7.UNLOCK PRESS +&-:Press the (+)&(-) button simultaneously to Unlock

8.DEVICE OVERHEAT PROTECTION:Temperate of the PCB is over 75℃,Please allow the device to cool down.

9.NO LIQUID:Atomizer is dry,please add liquid.

10.NEW +:0.00Ω SAME -:When the NEW or OLD atomizer display occurs on TC mode,press(+) button to re-detect the resistance,press (-) button to select the previous resistance.


Maximum power output:100W
Output mode:Adjustable
Material:Aluminum+Zinc alloy+silicone
Battery:18650/26650(Battery not included)
PCBA temperature safety shutoff:75°C
Maximum firingduration:10 seconds
Maximum Voltage Duration:9V
Operating temperature:-40°C~+80°C


1*Aegis Mod
1*USer Manual
1*USB Cable
1*18650 Battery Cap

Customer Reviews

Write Your Own Review

You're reviewing: Geek Vape AEGIS 100W Box Mod

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.